Werbung
LED-CONTROL
Operating Instructions
A
(A) Switch on/off illuminant D50 according to ISO 3664:2009
(B) Switch off/on UV-content
(C) Switch on/off illuminant D65 according to ISO 3668
(D) Switch on/off UV-Only
Commissioning
1. Turn on the luminaire by pressing the black main power
button. The diode (H) lights up when the light is in
standby mode.
2. Choose illuminant (A, C or D). The indicator above the
switch of the active illuminant is shining green.
3. If required, you can dimm the luminaire (F) or switch off
UV content of illuminant D50 / D65 (B). A red indicator is
shining if UV content is switched off (H).
4. The "UV-Only"(D) light type is independent and
completely autonomous from the "UV on/off" function
(B) which only refers to the D65 (C) and D50 (A) light
types.
DE | JUST Normlicht GmbH | Vertrieb + Produktion | Tobelwasenweg 24 | 73235 Weilheim / Teck | Telefon: +49 (0) 7023 9504-0 | Fax: +49 (0) 7023 9504-52
US | JUST Normlicht Inc. | 2000 Cabot Blvd. West, Suite 120 | Langhorne, PA 19047-2408 | Telefon: +1 267 852 2200 | Fax: +1 267 852 2207
FR | JUST Normlicht France SARL | 3 Rue Louis Pasteur | 67240 Bischwiller | Telefon: +33 (0)3880628-22 | Fax: +33 (0)3880628-23
V.7
10
20
30
H
D50 / D65
B
C
40
50
60
70
80
PRESET
D50 / D65
ONLY
D
E
(E) Preset 1 - Preset 2
(F) Continuously dimming of illuminants (see G)
(G) Dimming Indicator
(H) Standby indicator
5. Turn off the luminaire by pressing the black main power
button when you finished the color assessment.
Notes
ƒ
When the luminaire is switched on again, the last set
values are used (memory)
ƒ
Regardless of the memory function, the set dimming
value and light type (with and without UV component)
can be saved by holding down "P1" or "P2" button to
store the current values – all indicators (G) blink 2x. By
briefly pressing the buttons again, the stored values will
be loaded – single blink of all indicators (G).
90
100
G
F
Werbung
