Werbung
[Advanced Mode]
If you plan to use Eee AP with a notebook computer other than
Eee PC, please go through the settings described here.
Web Configuration Utility
Before you can set up your Eee AP in Web Configuraqtion Utility, you must config-
ure your computer as described on "Section III" of Eee AP User Manual.
The Web Configuration utility allows you to change the advanced
access point and Ethernet adapter settings.
Web Configuration utility using an Internet browser:
1. Open a web browser.
2. Disable your proxy settings, if any.
3. Type http://192.168.0.10 on the ad-
dress bar of the browser, then press
<Enter>.
Please do not change the default configurations for Eee AP. Doing so may prevent Easy
Connection Utility from functioninf properly. If you need to change the SSID, please refer to
"Section II" of Eee AP User Manual.
© ASUSTek Computer Inc. All Rights Reserved.
4. A web browser appears. When
prompted, enter the default user
name (admin) and password (admin),
then click OK. The Web Configuration
utility page appears.
4
Werbung
