Steinberg STEIN TEC Montageanleitung Seite 11

11
✓
connect hot water and cold water supply. In case that bathtub is fi lled via waste and over
fl ow, use Vérifi er l'étanchéité des toutes les connexions outlet connection C. In case that
this exit is not used, please plug with 1/2 „ brass cap. Please pay attention to the guide
line for the waste and overfl ow provided by the manufacturer.
✓
waste pipe to be connected behind the drain and overfl ow to the sewer.
Check all connection for tightnessn.
✓
Insert faucet into the tiled mounting plate and connect it. Attention: always place the
hand-shower at the right side to insure easy move of the fl ex hose.
✓
Seal the mounting plate with silicone.
11
10