Installation - HELIX S 62C.2 Bedienungsanleitung

Installation

Adjusting the level of the tweeter: The crossover allows to optimize the level of the connected tweeter
internally by repositioning the tweeter level jumper. Therefore loosen the two screws of the crossover
housing, remove the acrylic cover, pull the jumper straight upwards and reinsert it to the desired position.
+2 dB: The level of the tweeter is increased by 2 dB.
0 dB: The tweeter has the optimum level for most applications.
-2 dB: If you choose this switch setting, the level of the tweeter is reduced by 2 dB.
Connecting the separate crossover of the coaxial systems
Head unit /
amplifier
Ensure that all components are correctly connected (phase), i.e. plus to plus and minus to minus.
The positive leads of the loudspeaker system are marked with a red stripe.
Features
• Woofer with novel basalt fiber-paper compound
cone – a perfect combination of lowest weight,
high stiffness and inner damping
• 1" / 25 mm silk dome tweeter in a noble alumi-
num housing (S 6X: 25 mm / S 4X: 19 mm) for
balanced, natural sound reproduction and lowest
compression effects
• Individual HELIX basket with additional ventila-
tion holes for better voice coil cooling and high
power handling
• S 62C.2 / S 42C.2: "Flex-Crossover" with
6/12 dB (S 42C.2: 12/12 dB) slope, bandstop
14
Woofer
-
+
filter and three-stage tweeter level adjustment –
separable and therefore well suited for the
installation in vehicles with separate mounting
positions of the tweeter and woofer
• S 62C.2 / S 42C.2: Crossovers solely equipped
with high grade components e.g. low-distortion
air-core coils and minimum-loss Audiotec-foil
capacitors for tweeter crossover
• S 6X / S 4X: Separate inline crossover with
6/12 dB (S 4X: 6/6 dB) slope and integrated
tweeter protection
Tweeter
-
+