Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8. Technical Specifications
Model:
NEB 410
Type:
GCE850
Aerosol performances according to EN13544-1:2009 based
on adult ventilatory pattern with sodium
fluoride (NaF):
Aerosol output:
0.259 ml
Aerosol output rate:
0.07 ml/min.
Percentage of fill
volume emitted per
min:
3.5 %
Residual Volume:
0.8 ml
Particle size (MMAD): 2.83 µm
GSD (geometric stan-
dard deviation):
0.73
RF (respirable fraction
< 5 µm):
63.3 %
Large particle range
(> 5 µm):
36.7 %
Maximum air pres-
sure:
2.2 bar
Operating air flow:
5.31 l/min.
Acoustic noise level: 52 dBA
Power source:
230V 50 Hz AC
≤ 1000mA
Current:
Power lead length:
1.6 m
Nebuliser capacity:
min. 2 ml; max. 8 ml
Operating limits:
30 min. On / 30 min. Off
Operating conditions: 10 - 40 °C / 50 - 104 °F
15 - 95 % relative maximum humidity
700 - 1060 hPa Atmospheric pressure
Storage and shipping
-20 - +60 °C / -4 - +140 °F
conditions:
15 - 95 % relative maximum humidity
700 - 1060 hPa Atmospheric pressure
Weight:
approx. 1300 g
Dimensions:
157.5 x 105 x 61.5 mm
IP Class:
IP21
NEB 410
Reference to
EN 13544-1; EN 60601-1; EN 60601-2;
standards:
EN 60601-1-6; IEC 60601-1-11
Expected service life: 1000 hours
This device complies with the requirements of the Medical Device
Directive 93/42/EEC.
Class II device as regards protection against electric shocks.
Nebuliser, mouthpiece and masks are type BF applied parts.
The technical specifications may change without prior
notice.
Please report any serious incident that has occurred in relation to
the device, injury or adverse event to the local competent authority
and to the manufacturer or to the european authorised represen-
tative (EC REP).
Vigilance contact point:
https:/ec.europa.eu/growth/sectors/medical-devices/contacts
EN
5
Werbung
Kapitel
Inhaltsverzeichnis
