Appendix; Specifications - Samsung HW-J250 Bedienungsanleitung

APPENDIX

SPECIFICATIONS

Model name HW-J250
USB
Weight
GENERAL Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Rated Output Power
AMPLIFIER
S/N Ratio (Analog Input)
Separation (1kHz)
Supported play formats
(DTS 2.0 sound is played in DTS format.)
Wireless device
BT max transmitter power
output power
* S/N ratio, distortion, separation, and usable sensitivity are based on measurements using AES (Audio Engineering
Society) guidelines.
* Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- For information about the power supply and power consumption, refer to the label attached to the product.
 Open Source License Notice
- For further information on Open Sources used in this product, please visit the website:
http://opensource.samsung.com
- To send inquiries and requests regarding open sources, contact Samsung via Email
(oss.request@samsung.com).
Overall Standby Power Consumption (W)
Bluetooth Port deactivation method
• Hereby, Samsung Electronics, declares that this equipment is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: http://www.samsung.com go to Support > Search Product Support and enter
the model name.
This equipment may be operated in all EU countries.
5 V / 0.5 A
1.8 Kg
720 × 67 × 75 mm
+5°C~+35°C
10 % to 75 %
80 W(TWT= 4 OHM, THD = 10 %, 1 kHz,
WOOFER = 4 OHM, THD = 10 %, 100Hz)
65 dB
65 dB
LPCM 2ch, Dolby Audio™ (supporting Dolby®
Digital), DTS
100mW at 2.4GHz – 2.4835GHz
2.7 W
Press the "Bluetooth POWER" button on the remote
control when "BT" mode.
23
APPENDIX