Gehmann 705 Kurzanleitung Seite 2

your purchase of our torque wrench is a very sensible investment to have in your shooting equipment. Proper tools are indispensable to
avoid costly damage to your weapon due to torsion. The Gehmann torque wrench not only protects against torsion it is also invaluable
for the maintenance and care of your weapon and associated accessories.
The advantages of the Gehmann torque wrench at a glance...
a all essential srews can be safely tightened without causing damage to the action
a improves bolt action rifle accuracy and shot-to-shot consistency by torquing screws to the same reading every time
a no more overwinding of threads
a the 4 torque bits supplied (SW 2.5 - SW 3 - SW 4 - SW 5) fit all model rifles today
a range of torque: 4 - 12 Nm
a solid, long lasting construction
How to use your torque wrench:
1. Insert correct size torque bit into opening at the end of wrench
2. Turn the black knurled head until manufacturer's recommended torque reading for your rifle shows above edge of grip
3. To ensure perfect alignment of both action and stock, carefully tighten screws in turn
4. Tighten srews to break away from pre-set torque value
GmbH & Co. KG
705 Gehmann torque wrench
World leading firms recommend following correct torque:
Feinwerkbau: 6 - 8 Nm; Steyr Sportwaffen: 5 - 6 Nm; Walther: 7 Nm; Anschütz: 5 Nm
When the correct torque is reached, a noise is audible. Do not tighten anymore at this point as this
is at the correct torque setting. Please do not unwind the torque wrench past 4Nm as this could
cause problems with the audible click heard upon correct torque .
We thank you for your confidence in Gehmann products and wish you
many years of success and personal achievement.
Dear shooter,