Herunterladen Diese Seite drucken

Habitat Swan Bedienungsanleitung Seite 2

110 x 75 cm

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EN
This manual contains important information that should be retained for future reference.
Self-assembly.
Warning! Keep children out of the mounting area. Leave the plastic bags out of reach. Small parts are a choking hazard.
Materials
Table top: frosted tempered glass (5 mm).
Structure and feet: aluminum powder coated.
Assembly instruction
Before beginning assembly, identify all components using the manual.
In order not to mislead components, do not throw the packaging before completing the full assembly.
This product must be installed by an adult.
Plan to assemble the furniture as near as possible to where it will be installed.
Assemble on a clean, flat surface.
Assemble all components firstly, then tightly fix all screws.
Recommendations for use
This product is designed for outdoor use.
It is recommended to cover or store the product in a clean and dry place away from the bad weather and winter.
Do not leave the product in contact with puddles or on wet ground.
Do not leave stagnant water on the product.
Do not stand on the product.
Do not sit on the product.
This table is not meant to be used with an umbrella.
Otherwise, it must be used with a foot of parasol sufficiently weighted.
Maintenance
In order not to damage the surface, it is recommended not to deposit a hot or wet object directly on the table.
Do not use magazines or newspapers as trivets. The ink used may leave traces that can permanently stain the surface of the table.
To avoid the appearance of marks, do not leave any object still for more than 2 months. Sponge up spills immediately with a cloth. Then wipe
the surface with a clean, dry cloth.
Never allow a layer of moisture to remain on the surface of the product for long periods of time, especially in bright sunlight.
Do not place the product near a heat source (radiator, fireplace, barbecue ...) or a source of moisture. Heat and moisture can damage the
product. Do not use abrasive products. Cover and store the product in a clean, dry place, protected from the weather and winter.
Aluminum part
Dust regularly with a dry cloth.
Clean with dishwashing liquid and wipe with a clean, dry cloth.
Maintain with circular motions.
Avoid contact with abrasive materials that may damage
the surface.
Glass part
Do not hit the tempered glass part with a hard or sharp object.
Clean with a glass cleaner and a soft cloth, then wipe with a dry cloth.
Maintain with gentle and circular movements.
Do not put in direct contact with objects that may scratch the surface.
Keep the label with lot number, it may be useful in case of complaint.
If you have any comments or suggestions regarding this product, assembly instructions or service received, please enquire at your nearest
store or contact us on our website at: www.habitat.eu or write to this address: HABITAT, 70 AVENUE VICTOR HUGO, 93300 AUBERVILLIERS
FRANCE
Swan – 09/2020
1

Werbung

loading

Diese Anleitung auch für:

823689