Directions For Use - VERTBAUDET Travel'bed 70328-0098 Gebrauchsanweisung

GB
IMPORTANT : RETAIN FOR FUTURE
REFERENCE : READ CAREFULLY.
In order to avoid all danger of suffocation,
•
remove the protective plastic cover before
using this article. This covering should then be
destroyed or stored out of the reach of babies
and children.
To be assembled by an adult.
•
•
WARNING : BE AWARE OF THE RISK OF OPEN FIRE
AND OTHER SOURCES OF STRONG HEAT, SUCH AS
ELECTRIC BAR FIRES, GAS FIRES, ETC. IN THE
NEAR VICINITY OF THE COT.
•
WARNING: DO NOT USE THE COT IF ANY PART IS
BROKEN, TORN OR MISSING AND USE ONLY SPARE
PARTS APPROVED BY THE MANUFACTURER.
•
WARNING: DO NOT LEAVE ANYTHING IN THE COT OR
PLACE THE COT CLOSE TO ANOTHER PRODUCT,
WHICH COULD PROVIDE A FOOTHOLD OR PRESENT
A DANGER OF SUFFOCATION OR STRANGULATION,
E.G. STRINGS, BLIND/CURTAIN CORDS, ETC.
•
WARNING: DO NOT USE MORE THAN ONE
MATTRESS IN THE COT.
•
WARNING : NEVER LEAVE YOUR CHILD UNATTENDED.
•
WARNING: ONLY USE THE MATTRESS SOLD WITH
THIS COT, DO NOT ADD A SECOND MATTRESS ON
THIS ONE,SUFFOCATION HAZARDS
INSTRUCTIONS FOR USE AND MAINTENANCE
The frame, mattress pad, and storage bag may
•
be wiped clean using a mild cleaning solution
and a damp cloth.
Never clean with abrasive, ammonia based,
•
bleach based or spirit type cleaners.
NF EN 716-1/2

DIRECTIONS FOR USE

Make sure that the locking mechanisms for the
•
folding system are correctly latched before use.
After using the travel cot for a long period of
•
time,make sure that all the parts are properly
locked.
The lowest position is the safest and that the
•
base should always be used in that position as
soon as the baby is old enough to sit up.
If you leave the child unattended in the cot,
•
always make sure that the movable side is
closed.
Check this product regularly that all assembly
•
fittings are tightened properly before use.
To avoid risk of falling, when your child is able
•
to get out of bed unaided, the bed should no
longer be used for this child.
Before assembly or each use, inspect this
•
product for damaged hardware, loose joints,
missing parts or sharp edges. DO NOT use if
any parts are missing or broken. Contact
manufacturer for replacement parts and
instructions if needed. Never substitute parts.
Do not use harsh or abrasive cleaners.
•
Rinse clean with water to remove residue.
•
Refer to sewn in labels for fabric care instructions.
•
Store in a dry place.
•