Camera Settings - DragonTouch Vision 3 Bedienerhandbuch

EN

Camera Settings

1. Exposure: -3, -2, -1, 0, 1, 2, 3 (Default: 0)
By default, your camera uses the entire image to determine the appropriate
exposure level. However, depending on what you want the camera to prioritize when
determining exposure, you can select a level in the Exposure setting. This is
particularly useful for shots where an important region might otherwise be over- or
underexposed.
When you change this setting, the LCD display will immediately show you the effect
on your image. If you change the mode, the camera will revert back to using the
entire image to determine the correct exposure level.
2. White Balance: Auto, Sunny, Cloudy, Incandescent Light, Fluorescent Light
(Default: Auto)
White Balance can be used to adjust the color temperature of videos and photos
and optimize it for cool or warm lighting conditions. When you change this setting,
the LCD display will immediately show you the effect on your image.
3. Wifi: Off / On (Default: Off)
Note: You can also hold and press the Up button to turn Wifi on in Video or Photo
Mode.
4. Image Rotation: Off / On (Default: Off)
This setting determines the orientation of your video and photos, helping to prevent
upside down footage.
5. Driving Mode: Off / On (Default: Off)
If you turn on Driving Mode and connect the camera via the onboard cigarette
lighter, the camera will turn on automatically when you start your car and turn off
when you stop your car.
6. Light Source Frequency: Auto, 50Hz, 60Hz (Default: Auto)
7. LED Indicator Light: Off / On (Default: On)
11