Care & Maintenance; Cleaning Stuck-On Ingredients; Cleaning; Storing - Ninja Foodi POWER NUTRI BLENDER 3-IN-1 Bedienungsanleitung

CARE & MAINTENANCE

CLEANING STUCK-ON INGREDIENTS

NOTE: For best results, use a dishwasher
to remove stuck-on ingredients.
1 After processing, immediately clean the
container and blade assembly under
warm, soapy water.
2 Depending on the container, fill with
washing-up liquid and water according to
the following instructions:
Jug:
1 OR 2 SMALL DROPS OF WASHING-
UP LIQUID
FILL WATER TO
DOUGH MAX LINE
With the dough or stacked blade assembly
installed, fill with warm water up to
DOUGH MAX line and add 1 or 2 small
drops washing-up liquid. Secure jug lid and
ensure the pour spout is securely closed.
Power Nutri Bowl:
1 OR 2 SMALL DROPS OF WASHING-
UP LIQUID
FILL WATER TO TOP
OF POWER PADDLE
Fill with warm water up to top of Power
Paddle and add 1 or 2 small drops
washing-up liquid. Install blade assembly.
68 ninjakitchen.eu
Power Nutri Cup:
1 SMALL DROP OF WASHING-
UP LIQUID
FILL WATER HALFWAY
Fill halfway with warm water and
add 1 small drop washing-up liquid. Install
blade assembly.
3 Install the container on the motor base.
Select MIX, then press START/STOP.
NOTE: If using the Power Nutri Bowl,
twist the Power Paddle anti-clockwise
continuously while cleaning.
4 Once program is complete, thoroughly
rinse container and blade assembly
under warm, soapy water. Use the
included cleaning brush to remove any
remaining residue.

CLEANING

Hand-Washing
Wash containers, lids and blade
assemblies in warm, soapy water.
Use a dishwashing utensil with
handle to avoid direct contact
with the blades. Use the included
cleaning brush to remove excess
residue, such as when dealing with
stuck-on ingredients, like doughs
and batters. Exercise care when
handling the blade assembly as
the blades are sharp. Thoroughly rinse and
air-dry all parts.
NOTE: The Power Paddle in the Power
Nutri Bowl is not removable.
Dishwasher
Containers, lids and blade assembly are
dishwasher safe. Ensure the blade assembly
and lid are removed from the container
before placing in the dishwasher.
NOTE: For best results, use a dishwasher
to remove stuck-on ingredients.
Motor Base
Unplug the motor base before cleaning.
Wipe motor base with a clean, damp cloth.
DO NOT use abrasive cloths, pads or
brushes to clean the base.

STORING

For cord storage, wrap cord with hook-and-
loop fastener near the back of the motor
base. DO NOT wrap the cord around the
bottom of the base for storage.
DO NOT store blended or unblended
ingredients in the cup or bowl with the
blade assembly attached.
DO NOT stack items on top of the
containers. Store any remaining attachments
alongside the unit or in a cabinet where they
will not be damaged or create a hazard.

RESETTING THE MOTOR

This unit features a unique safety system
that prevents damage to the motor and
drive system should you inadvertently
overload it. If the unit is overloaded, the
motor will be temporarily disabled. Should
this occur, follow the reset procedure below.
1 Unplug the unit from the electrical socket.
2 Allow the unit to cool for approximately
15 minutes.
3 Remove the container's lid and blade
assembly. Empty the container and
ensure no ingredients are jamming the
blade assembly.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the most
typical cause of appliance overload.

ORDERING REPLACEMENT PARTS

To order additional parts and attachments,
visit ninjakitchen.eu
ninjakitchen.eu 69