Insert the power supply unit with the contacts first into the battery
compartment of the flash so that the contacts of the power supply
unit are on the contacts in the battery compartment. Connect the
mains cable to the power supply unit and insert the plug of the
mains cable into the socket.
Please allow the power supply unit to cool down before packing it
for transport or storage. To do this, remove the mains cable from the
power supply unit.
Unit does not switch on
• Please check that the power supply unit/mains cable is correctly
seated.
• Please check (if necessary with a suitable measuring device)
whether there is voltage for the mains cable at the socket.
If the problem persists, please contact our service department.
Input
Output
Dimensions
Weight
We reserve the right to update functions or parameters without further notice
Operation
Troubleshooting
Technical data
100 – 240 V
16.7 V
max. 2 A / 33.4 W
130 x 90 x 40 mm
300 g
11
/ 0.4 A, 47 – 63 Hz