Seite 2
Package contents (A) 1x QuickPort XT HC (A) 1x QuickPort XT HC (B) 1x USB-3.0-Kabel (B) 1x USB 3.0 cable (C) 1x Netzteil (C) 1x Power supply (D) 1x Anleitungs-Flyer (D) 1x Instructions flyer...
Seite 3
Anschließend verbinden Sie das mitgelieferte USB-3.0-Kabel mit dem QuickPort XT HC und Ihrem PC. Connect the power supply to the device and an electrical outlet. Then connect the included USB 3.0 cable to the QuickPort XT HC and your PC.
2.5" or 3.5" SATA HDD/SSD installation Stecken Sie Ihre 2,5"- oder 3,5"-SATA-Festplatte in den Festplattenschacht des Gerätes.* Insert your 2.5" or 3.5" SATA hard drive into the hard drive slot opening of the device.* HINWEIS: *Wenn Sie eine neue Festplatte anschließen, ist diese gegebenenfalls nicht partitioniert und Ihr Betriebssystem wird deshalb die Festplatte nicht erkennen.
Seite 5
Schalten Sie das Gerät ein. Ihr Betriebssystem erkennt den QuickPort XT HC automatisch. Turn on the device. Your operating system will automatically detect the QuickPort XT HC.
Seite 6
Using a Memory Card and Additional USB Front Port Stecken Sie eine kompatible Speicherkarte in den Kartenleser und verbinden Sie ein USB-Gerät mit dem USB-Front-Hub. Alternativ können Sie den Kartenleser auch als weiteren USB-Front-Anschluss verwenden, um zwei USB-Peripheriegeräte gleichzeitig zu betreiben. Insert a compatible memory card into the card reader and connect a USB device with the USB front hub.
Seite 8
If connecting a new hard drive your operating system might not recognize it if it is not properly partitioned. Ensure that you first partition your hard drive using the operating system and format. SHARKOON assumes no liability for any possible data loss occurring, in particular due to improper handling. All rights reserved, in particular (also extracts) those of translation, reprinting, reproduction by copying or similar procedures.