Fizz Creations SYNTH KIT Bedienungsanleitung Seite 2

MAKING YOUR OWN
SYNTH KIT
This product includes everything you need to
make your own Synth!
Follow the instructions and you'll have made
your own Synth in no time! You will need to
use the double-sided tape & connecting pegs
to hold together the card nets and the tech
within. Closely follow the step by step guide
and use the reference key to ensure it is
completed successfully.
Octave
#/b
You will need:
3 x AAA Batteries
(not included)
Attaching Components
Double Connecting
Sided Tape Pegs x 8
(1)
Electrical Components
Speaker
(3)
Keyboard
(5)
(2)
Top Tip!
Before you start it helps to fold along
the crease lines to further define the
shape – this makes it much easier
further down the line! If one layer of
double sided tape comes unstuck.
Apply another strip to the other side
of the card so you are sticking tape to
tape. This will ensure it is held together.
2
GB
Tremolo
Envelope
On/Off and
Volume
Dial (4)