Declaration Of Conformity - nedis BTWV10GN Kurzanleitung

4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect
with and tap Done.
Placing the batteries (image C)
-
Use only size AA batteries (not included) for this product.
-
Do not use rechargeable batteries.
1. Pull the tabs of the battery compartment A
out of the product.
2. Place 4 batteries into A
-
Make sure to match the (+) and (-) polarity markings.
3. Place A into the slot for the battery compartment A
4
-
Make sure A
run into A
4
The status indicator LED A
Installing the product (image D)
1. Connect the water inlet A
and the water outlet A
included).
Make sure to fasten the tap and the hose tightly to avoid
4
water leakage.
Connecting the app
1. Enable Bluetooth on your phone.
2. Open the Nedis Smartlife app on your phone.
Make sure your phone is within 60 meters (open area) from
4
the product.
The product automatically connects with the app.
The app notificates that there is a new product available to
connect to the app.
3. Follow the instructions in the app.
The product appears in the list of connected products.
4. Press the control button A
5. Open the water tap to the desired position.
-
Disconnect the product when freezing temperatures are
expected, to avoid potential freeze damage.
Use the app to set and operate the product.
4
For more information about the working and possibilities of the
app, consult the extended manual online.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product
BTWV10GN from our brand Nedis®, produced in China,
.
4
4 is completely closed to ensure no water can
.
starts blinking.
1
6
to a garden hose or sprinkler (not
7
2
to an outside tap (not included)
to activate the product.
8
, to take A
4 4
3 .