Power Supply - LTC Audio SOUNDBAR Bedienungsanleitung

POWER SUPPLY

Connect the power adapter provided together with this player to the local
power grid and insert it into DC 12V port on the back of player to supply
power normally.
STARTUP
Two red dots will flicker in the middle of LED screen after the normal power
supply and then press " " button on the remote controller or player
shortly to start up.
AUX IN Mode
Directly enter into AUX status, default in the player, after start-up and
connect aux IN line to AUX (L/R) port on the back of player and connect AUX
line to the external sound source, like MP3/CD, etc., and start enjoying the
music input from AUX. Please adjust the volume of external sound source to
the moderate level and make sure the player is in play status.
BLUETOOTH Mode & PAIRING
Press button on the remote controller or "(←" button on the player to
switch over to Bluetooth function and enter into this status from two states
during AUX status.
1. Directly enter into search mode after start-up.
2. Press " " button for more than 3 seconds and the blue lamp will flicker
quickly to enter into PAIR status immediately.
1) Put the cell phone within 3 meters.
2) Activate the Bluetooth functions of Bluetooth cell phone so that the cell
phone starts searching for Bluetooth device (please refer to the Users'
Manual of cell phone for more details).
3) Select «LTC_SOUNDBAR » in the list of the found devices.
©Copyright LOTRONIC 2013 5