Installation - Xsarius Sniper Serie Bedienungsanleitung

Installation

Consult the safety instructions before you switch on the appliance.
1. Connect the DVB-C / T2 cable to the (RF IN) and / or
connect the DVB-S / S2 cable to the (LNB IN) (Combo / Satellite).
You connect the OTT to the internet with UTP Ethernet network cable.
PAY ATTENTION! Make sure your receiver is not connected to the power
before you connect the cables.
Tuner in
DVB-C/T2
and / or
DVB-S/S2
1
External
HDD or
USB Stick
2. Connect the receiver to your TV using the supplied HDMI cable.
3. Connect the original supplied external power adapter and switch on the
receiver.
4. After starting up, you enter the setup menu for the installation.
© Copyright 2018 A.D. B.V. - Xsarius Sniper HD+ Series H.265
PC TV (HDMI)
External IR-sensor
Network
2
Hi-Fi System
3
English manual 33