Intellinet Network Solutions 560559 Anleitung Seite 3

24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports
Connections
• All ports on the switch support Auto-MDI/MDI-X functionality,
so you can use straight or crossover UTP/STP cables to connect
the RJ45 ports to PCs, routers, hubs, other switches, etc.
• Use the included power cable to connect the receptacle on the back of
the switch to a power outlet, and confirm that the Power LED lights.
LED
Power
Link / ACT / Speed
1–24
PoE
SFP1 & SFP2
Basic Web-Based Browser Management
1 Open your Web browser.
2 Enter http:// and the IP address of the switch in the Address field.
The default management IP address is 192.168.2.1.
3 Press Enter to display the login screen. In the Username field, enter admin; in the
Password field, enter the serial number on the bottom of the switch. Click OK.
Color
Red
10/100M: Orange;
Blinking
1000M: Green
Orange Blinking
Green Blinking
Status
On Unit is receiving power.
Off
On Valid port connection.
Data transmitted/received.
Off No link established.
On The connected device is receiving power.
Abnormal power supply.
Off No PD device is linked.
On Valid port connection.
Data transmitted/received.
Off No link established.
Instructions
Operation
Check connection.
3
English