Operation
Insert the power supply unit with the contacts first into the battery
compartment of the flash so that the contacts of the power supply unit
are on the contacts in the battery compartment. Connect the mains
cable to the power supply unit and insert the plug of the mains cable
into the socket.
Please allow the power supply unit to cool down before packing it for
transport or storage. To do this, remove the mains cable from the power
supply unit.
Troubleshooting
Unit does not switch on
• Please check that the power supply unit/mains cable is correctly seated.
• Please check (if necessary with a suitable measuring device) whether
there is voltage for the mains cable at the socket.
If the problem persists, please contact our service department.
Technical data
Input
Output
Dimensions
Weight
We reserve the right to update functions or parameters without further notice.
100 – 240 V
16.7 V
max. 2 A / 33,4 W
130 x 90 x 40 mm
300 g
/ 0,4 A, 47 – 63 Hz
11