JOBO Carcam Bedienungsanleitung Seite 7

2.Auto Power off:
With this setting you can activate complete auto-power off of the camera after 2, 5, or 10 minutes of
making no camera settings. If this setting is activate the camera will completely power off. We do not
recommend you to activate this option.
3. Beep Sound:
The beep sound during menu operation can be activated or deactivated.
4. language:
You can choose any of the following languages: English, German, French, Spanish, Italienisch,
Portuguese, Chinese, Japanese, and Russian.
5. TV-Mode:
You can choose between the European PAL-Standard or the American NTSC setting.
6.Hz / Frequency:
Here you can choose between the European 50 Hz or the American USA 60 Hz video frequency.
Depending on this setting the camera will make recordings eiher with25 or with 30 frames per second
(fps).
7. Format:
This feature allows you to (re-)format the micro-SD card inserted into the camera. We do recommend
you to reformat any new micro-SD card. Please make sure to use micro-SD cards of Class 4 standard or
higher.
8. Default Setting:
This function allows you to reset the camera to factory settings. All manual menu settings will get lost
when the camera is reset to factory settings.
9. Image Flip:
In case the camera is mounted up-side down this feature allows you to record in flip-mode so that
play-back will be shown up-side up.
10. Date Stamp:
This feature was developed specifically for dash cams. If activated the video will record the date and
time of the recording and show it as a time-stamp during play-back. This allows for automatic date
and time documentation as long as date and time have been correctly set before making recordings
(see above point 1).
11. Version:
This menu point shows the currently installed firm ware version.
12. G-Sensor (Gravity Sensor):
This is a very important feature, developed for dash cameras.
The built-in Gravity sensor senses any impact and will protect the corresponding video file against
being over-written. This will avoid important recordings from being lost ("Black-Box-Function"). We
recommend to activate this function, especially when making cyclic recordings (loop recordings). If the
G-Sensor is activated this is indicated by a pictogram of a car with illustrated vibration.
- 06 -