General Info; Installation And Configuration - Perenio IONIC SHIELD PEWOW01 Schnellstartanleitung

1

GENERAL INFO

Specification
Functions
Device Class
Intended Use
Other Info
LED Indication
Scope of
Supply
Warranty
* Viral load means the known family of coronaviruses (including SARS-CoV-2) and their strains.
** LED Indication for errors: flashing blue (capsule is missing), flashing red-blue (battery operation error).

INSTALLATION AND CONFIGURATION

1. Unpack the Ion Diffuser and the accompanying accessories. Make sure that the
device is switched off (Power LED is off).
Doc Date: 30/04/2021
©Perenio IoT spol s r.o. All Rights Reserved
Input: DC 5 V / 2 A, 10 W max. Output: Emission of positive and
negative ions (including Mg
Battery: Built-in li-ion (2,600 mAh, up to 6 hours of autonomous
operation). IP30 Protection Class
Immediate ionization in an enclosed area of application of up to
2 meters around the device while it is switched on. Ionization of
closed spaces: up to 60 m
3
40,000 ion/cm
Class I Medical device
Prevention of diseases caused by known coronaviruses, by significant
reduction of the viral load* in the enclosed area of application of the
device
Operating conditions: 0 °C to +40 °C, up to 70% RH (non-condensing).
Storage conditions: 0 °C to +60 °C, up to 90% RH (non-
condensing). Dimensions: Ø 80 mm × 132.5 mm
Power LED is on or off: the device is switched off.
Power LED is blinking: device is switched on and operating**.
Battery charge level indication of the Power LED:
green (75–100%), yellow (30–74%), red (1–29%)
Ion Diffuser with CoV Capsule, USB-C Power Adapter, Quick Start
Guide, Warranty Card, Sticker
2 years (service life: 2 years)
Version: 2.0.0
- - - -
, K , Zn , Pt
3
in 30 minutes. Ions concentration: up to
2
-
, Au ) from CoV capsule.
1