Button Operation; Power Button - ecofort ecoQ CleanAir 400 Bedienungsanleitung

FUNCTION INSTRUCTIONS
Before using, please remove the package of the filter. Ensure the device is unplugged before
removing or installing the filter.
①
③
1. Press the red circle switch to take out the back cover.
2. Remove the filter from the machine.
3. Remove the packaging of the new filter.
4. Put the filter into the machine.
5. Press the red circle switch button to close the back cover.
52
②
④ ⑤
Close
Close

Button Operation

Connect the power, all indicators will be on for 1s and all lights will be off except the power
button. After that, the device will be in standby mode.

Power Button

Press the Power Button, the device turns on in Auto Mode at default. The indicator light will
be changed among the color circulation of Blue - Cyan - Green - Yellow - Orange - Red -
Purple, which will last 30s for preheating.
During the preheating, the air purifier works in a high mode and the value on the digital display is
00. After 30s, the indicator light will be influenced by the air quality. (Green means good air quality,
the device works in a low mode. Yellow means average quality, the device works in a middle
mode. Red means poor air quality, the device works in a high mode.) The digital display will
show the PM2.5 numerical according to the air quality.
Wind Speed Button
In the condition of working, press the Wind Speed Button to adjust the wind speed among the
circulation of Auto-S-H grade, and the corresponding indicators will be on. Every time you press
the button, the buzzer rings for one time.
Sleep Mode: Working in the low mode, no operation within 5 seconds, will enter to sleep mode
Auto Mode: The device automatically adjusts the wind speed the light will show the different
color according to the air quality
53