Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Frequency: 433 MHz
Coding: Rolling-Code
Channels: 4
Battery: 3V CR2032
Coding in a Remote Control
Press "RF-learn" button for 2 seconds, the blue LED will come on; then press the first button on the remote;
the Blue LED will blink three times and then turn off after 10 seconds. The remote is now coded in.
RF-Learn
Blue LED ON
2 Sec
NOTE: Erase transmitter Memory (on motherboard): Press and hold the "RF-LEARN" button on the circuit board for 10 seconds
until blue LED goes out.
Schartec remote controls meet the requirements of the applicable European and national guidelines. The conformity has been
proven, the corresponding declarations, certificates, test reports and documents are deposited with the manufacturer and can be
As a dealer for the distribution of electronic, battery-operated devices, we are obliged by law to inform our customers about the
Electrical and electronic devices, as well as batteries, must not be disposed of as household or residual waste, but must be
The complete version of the battery law can be found here:
Remote Control SR-4
Declaration of Conformity (CE)
requested if required.
Information about battery regulation
following:
delivered in the appropriate acceptance and collection points will.
Blue LED blinks three times
http://www.gesetze-im-internet.de/bundesrecht/battg/gesamt.pdf
Blue LED OFF
Werbung
