Beco BA309С Bedienungsanleitung Seite 29

4 Installation
1. Cut the adhesive foam seal A and B strips to the proper lengths, and attach them to the window
sash and frame as shown.
2. Insert the window slider assembly into the window opening.
3. Cut the non-adhesive foam seal C strip to match the width of the window. Insert the seal between
the glass and the window frame to prevent air and insects from getting into the room.
2 screws
4. If desired, install the security bracket with 2 screws as shown.
5. Insert the window slider adaptor into the hole of the window slider.
Local air conditioner / Instruction Manual
Window slider B
Window slider A (if required)
Foam seal C
(Non-adhesive type)
Security Bracket
or
or
Security Bracket
or
2 screws
or
Window slider B
(if required)
Window slider A
Foam seal C
(Non-adhesive type)
29 / 276 EN