GET JUMPSTARTER MINI Handbuch Seite 5

HOW TO START PETROL VEHICLES (12V) USING JUMPSTARTER:
1.
Completely insert the
connector with the clamps into
the outlet port with a rubber cap
marked with an open hood car.
2.
The LED on the clamps
connection unit will start blinking
red and green, showing the device
is ready to be connected to the
battery.
3.
Connect the red clamp to the
battery's positive (+) terminal
and the black clamp to its
negative (-) terminal.
WARNING: do not to invert
the two clamps for any reason.
4.
Turn on the vehicle using the
JumpStarter only if at least 3 LEDs
are lit on the charge indicator.
EN
5