AEG IKK86683FB Benutzerinformation Seite 18

18 www.aeg.com
Mode H3
Mode H4
Mode H5
Mode H6
1) The hob detects the boiling process and acti‐
vates fan speed in accordance with automatic
mode.
2) The hob detects the frying process and acti‐
vates fan speed in accordance with automatic
mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch
comes on and goes off.
3. Touch
4. Touch
on.
5. Touch
mode.
To operate the hood directly
on the hood panel deactivate
the automatic mode of the
function.
When you finish cooking and
deactivate the hob, the hood
fan may still operate for a
certain period of time. After
that time the system
deactivates the fan
automatically and prevents
you from accidental
activation of the fan for the
next 30 seconds.
Auto‐
1)
Boiling Frying
matic
light
On Off Fan
speed 1
On Fan Fan
speed 1 speed 1
On Fan Fan
speed 1 speed 2
On Fan Fan
speed 2 speed 3
for 3 seconds. The display
for 3 seconds.
repeatedly until comes
to select an automatic
Operating the fan speed manually
You can also operate the function
2)
manually. To do that, touch
hob is active. The symbol turns white.
This deactivates automatic operation of
the function and allows you to change
the fan speed manually. When you press
, you raise the fan speed by one.
When you reach an intensive level and
press again, you set the fan speed to
0, which deactivates the hood fan. The
symbol turns red. To start the fan again
at the fan speed 1 touch
To activate the automatic
operation of the function,
deactivate the hob and
activate it again.
If the function is not active,
deactivates after 10
seconds. When the hob is
restarted,
Activating the light
You can set the hob to activate the light
automatically whenever you activate the
hob. To do so, set the automatic mode to
H1 – H6.
The light on the hood
deactivates 2 minutes after
deactivating the hob.
when the
.
lights up again.