La Sportiva SOLAR Bedienungsanleitung Seite 5

2. Heat Moldable Liners
The heat moldable liners are pre-shaped and ready for use without any additional fitting. Over time, the liner will adapt
to your foot becoming more comfortable and ensuring high performance.
However, in order to guarantee the perfect fit immediately, we suggest you have your liners custom fit by a specialized
dealer.
During the thermoforming process, heat the liner to a maximum of 90 °C. To reach this temperature depends on the
equipment used and can vary from 5 to 10 minutes. Warning: excess heat can damage the material. Insert the foot
into the liner and centre the foot carefully. Insert boot liner and foot into the ski boot keeping the foot as straight as
possible. Insert the boot liner into the ski boot carefully to avoid the formation of creases and/or too much pressure on
the foam. Close the boot and lock it in SKI MODE. Bend your knees and hold the position, allow to cool for at least 10
mins. Raise your toes with the aid of a wedge to find the ideal heel position.
5