ready2music GALAXIA Bedienungsanleitung Seite 5

6. Find the product name "Galaxia R2M" in the menu and
press "pairing".
7. If the pairing is successful, the LED light is solid blue.
b. Pairing the headset with your phone
1. Make sure the headset is off.
2. Set your Bluetooth phone to "discover" the wireless
headset.
3. Place both devices not more than one meter away
from each other.
4. Press the power button on the headset for about 4 sec-
onds. When the blue and red LED will blink alternately,
it indicates that the headset has entered pairing mode.
5. Find the product name "Galaxia R2M" in the menu and
press "pairing".
6. If the pairing is successful, the LED light is solid blue.
Please note: If your laptop/phone device is under version
2.1, please enter the passkey ="0000" (4 zero).
Listening to Music from your headset
Once the headphones are paired with your device you can
stream music wirelessly to the headphones. Select the
track you wish to listen to and it will be streamed to your
headphones. Should you encounter any problems while
streaming please refer your device's user manual for fur-
ther information.
Playback control can be done directly through your device:
Next track/Volume + button: To go to next song and
volume control up
Previous track/Volume - button: To go to previous
song and volume control down
Power on/off button:
Press and hold the power button for approximately 2s
to power on, Press and hold the power button for ap-
proximately 3s to power off; Press once & release to
pause, press again & release to resume playback.
Control Function
If your Bluetooth device supports AVRCP (Audio/Video
Remote Control Profile) you can use the Bluetooth head-
phones to perform basic remote functions once paired
while listening to music. The functions in the below table
may differ on your device. Please refer to your device's
user manual for further information.