Zipper Maschinen ZI-LPE20-AKKU Betriebsanleitung Seite 17

Switching on:
 Push ON-OFF-switch (G).
 For continuous operation push self-locking switch
(H) up.
 LED lights
Switching off:
 Release ON-OFF-switch (G)
 At continuous operation push self-locking switch
(H) down.
 LED off
Inflating vehicle tyres:
 Place the air connector (A) in open position to the
valve.
 Close the air connector (B)
 Switch on the machine.
 Inflate until the desired pressure is showing on
the manometer.
(max. continuous operation 5 min!)
Inflating other items:
 For inflating toys, sports and beach articles and
bicycle tyres use balladapter (J), tapered adapter
(K) or adapter for bicycle (M).
Operating with adapter for cigarette lighter
Remove battery and insert the adapter instead of it.
Charging batttery:
 Connect the charger to the power supply
 Connect the charger plug with the battery
Battery state of charge:
 LED lights: charger connected
 LED flashes: charging process
 LED 1-3: charging status.
12 MAINTENANCE
Unplug battery and safety switch (if equipped) before all maintenance and
settings!
Serious injury due to unintentional or automatic activation of the machine!
Always wear protective gloves while working on the cutting tool!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
ZIPPER MASCHINEN GmbH
ZI-LPE20-AKKU
www.Zipper-Maschinen.at
A T T E N T I O N
N O T I C E
MAINTENANCE
17