Carena SALTHOLMEN BEDSIDE CRIB Bedienungsanleitung Seite 48

9.
Release the studs from the tubing (fig 13.) and partially remove the tubes. Once this operation
has been performed on both sides, lower the crib side panel and fit it to the base of the crib
main body using press studs (fig 14.)
WARNING ! Use the crib with the tube lowered in co-sleeping mode only.
10.
Move the crib close to the parents bed and check the height of the crib compared with the
mattress of the bed (fig 15. )
WARNING ! The mattress of parent's bed shall be aligned to or over the height of the drop side
in the lowest position.
WARNING ! In co-sleeping mode the 2 legs of the crib should always be adjusted to the same
height.
GB