Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation advice RolSolar systems
You have chosen to install a stand-alone solar-electric roller shutter drive system. The system
ensures reliable electrical operation of your roller shutters all year round.
To ensure that this is always the case, we would like to give you some advice on the installation of
the solar system that should be followed. A solar system can only work reliably with sufficient
sunlight.
Installation instructions
The solar panel of the RolSolar system must not be shaded and must receive sufficient surrounding
light. Depending on the type of motor used, adjust the power of the solar panel. Use the appropriate
number of solar panels according to the following table.
Motor type
M10
M20
* Use 2 panels in case the shutter surface is above 3m²
Assembly instructions
•
Roof overhangs or similar structures
Ensure that the solar panel has an unobstructed
orientation to the sky. We recommend an
overhang less than the double of the distance
towards the roof overhang.
•
Obstacles opposite the solar panel
Obstacles directly opposite the solar panel do
reduce the solar efficiency of the system. For
sufficient
charging
recommend a minimum distance according the
picture shown beside.
SOUTH
1
1
performance,
we
Orientation
EAST
WEST
1
1
2
2
NORTH
1/2*
2
Werbung
