Behringer MH363 Kurzanleitung Seite 13

24
EUROLIGHT MOVING HEAD MH363
Display
(5)
(7)
(1) (2)(3)(4)
Display Functions:
Press the MENU button to access menu options, keep pressing MENU to toggle menu items. Press the ENTER button to access desired
functions and the display will flash, then use the UP/DOWN buttons to navigate and select the desire setting. Press ENTER to save and
confirm, or press MENU to go back without saving.
The main functions are as follows:
Menu Options and Settings
A D D R E S S
0 0 1
D M X
DMX Address code selection 001 to 512
A D D R E S S UP DOWN
↑↓
A D D R E S S
5 1 2
9 C H A N
C H A N N E L
M O D E
DMX Channel selection 9/13 Channel mode
UP DOWN
↑↓
1 3 C H A N
Description
Item No. Function
Activates main menu and toggles
1 MENU between menu items. Closes an
open submenu without saving
(6)
Decreases the displayed value
(8)
2 DOWN
by one/Navigate function
Button:
Increases the displayed value
3 UP
by one/Navigate function
Enter selected function/Confirm
4 ENTER
and save
LED turns on when detects
5 DMX
console signal, enter in DMX mode
LED turns on when in
6 SLAVE
SLAVE1/2/3/4/5 mode
LED:
LED turns on when in
7 MASTER
MASTER mode
LED turns on when in
8 SOUND
SOUND control mode
Description
Menu Options and Settings
S H O W 1
S H O W
There are four different performance modes: 1/2/3/4 performance modes and
M O D E
UP DOWN
↑↓ 4 different performance states
S H O W 4
Activate MASTER (HOST) mode
M A S T E R
Activate SLAVE1 mode: when connected to DMX input, slave unit will replicate
S L A V E 1
the master (HOST) unit
Activate SLAVE2 mode: when connected to DMX input, slave unit will replicate the
S L A V E 2
master (HOST) unit and mirror PAN movement
S L A V E
M O D E
Activate SLAVE3 mode: when connected to DMX input, slave unit will replicate the
S L A V E 3
master (HOST) unit and mirror TILT movement
Activate SLAVE4 mode: when connected to DMX input, slave unit will replicate the
S L A V E 4
master (HOST) unit and mirror PAN and TILT movements
Activate SLAVE5 mode: when connected to DMX input, slave unit will replicate
the master (HOST) unit or randomly change color and/or mirror TILT and/or
S L A V E 5
PAN movements
Keep the light working properly
N O
B L A C K
O U T
Standby mode (Light blackout), but in DMX mode can still be operated.
When abnormal DMX signal occurs, light will automatically enter in stand by
Y E S
(Black out)
Turn SOUND CONTROL mode ON. The LED light will follow the rhythm of the music
O N
S O U N D
S T A T E
Turn SOUND CONTROL mode OFF
O F F
0
S O U N D
Select sound sensitivity of SOUND control mode from lowest 0 to 100 highest
UP DOWN
S E N S E
↑↓
1 0 0
25
Quick Start Guide
Description