Installation; Device Operation - Phonocar 04971 Gebrauchsanweisungen

Introduction
The Ioniser 04971 removes harmful micro particles and harmful gases such as formaldehyde, benzene and smog
from the air. It reduces unpleasant odours and improves effectively the air quality of the passenger compartment.
Function

Installation

Device operation

When the vehicle is started, the ioniser is activated and the last power off function resumes.
Press on the upper multifunction button to adjust the fan speed, which will be indicated by different LED colour:
Blue light - Fan in standard mode for ordinary purification
Yellow light - Quick running fan for faster purification
Red light - High efficiency running fan with following recycling
By pressing the multifunction button for 3 seconds the device switches off.
User-friendly: just one button for device activation and working mode with fan
speed indication.
Thanks to the USB power supply, it is possible to use the device on the car, just
by inserting it in the cup holder.
It can be also installed in other places, as it can stay on flat surfaces of all kinds.
The device acts on the air with different filtering levels.
FILTER
The main filter captures floating macro-particles such as hair, pollen and dust in
the air.
The high efficiency filter (HEPA) retains fine particles such as microorganisms,
viruses and PM2.5 up to 0.3 um in size. The high-efficiency active carbon filter
effectively absorbs formaldehyde, benzene and other toxic and harmful gases.
Place the ioniser in the car's cup holder and check that it is stable.
Do not place it on the dashboard or other positions with no possibility
of blocking.
Connect the supplied USB cable to a plug in the car; if there is no USB port, use
an adapter (OUR CODE 05211 not included) for plugging it into the cigarette
lighter socket. Plug the power jack on the ioniser as shown in the figure.
4
EN