Front Panel; Rear Panel - DELTA DORE PoE SW4 Installationsanleitung

3 - Description

3.1 Front panel:

LED Status
On steady
1 - PWR
Off
2- PoE-MAX
On steady
Flashing
Off
3- LINK-ACT On steady
Flashing
Off
4- PoE status On steady
Flashing
Off
5 - PoE ports - 1, 2, 3, 4.
6- Port 5 (UPLINK) router

3.2 Rear panel

7- Extended mode selector. Refer to § 5.4.
8- Earth connection:
Connection of the PoE SW4
unit to the earth connection.
9- Power outlet:
Use the 230 V power supply
adapter supplied.
1 3 4
1 2
2 5
Description
The device is properly connected to the mains power.
The device is poorly connected or not connected to the
mains power.
The PoE power reaches its lower limit value (6 W).
The PoE power reaches its maximum (60 W).
The PoE power supply operates correctly and the PoE
power available is greater than 6 W.
The corresponding port is correctly connected.
Transmission or reception of data on the port
The corresponding port is not properly connected or is not
connected.
The corresponding port is connected and correctly supplies
power to the PoE peripheral device.
The PoE output of the corresponding port exceeds 30 W.
No POE compatible peripheral is connected.
3 4 5
6
7 8 9
EN
13