Putting Into Operation; Technical Data; Adjusting The Brightness; Warranty - Bresser Br-Rl10B Bedienungsanleitung

PUTTING INTO OPERATION

Fig. 6
1. Insert the USB plug of the power cord into a commercially
available 5V USB power adapter*. Insert the mains plug of the
power adapter into the socket.
2. Press the On/Off/Colour set button for about 2 seconds to turn
the device on.
TIP: As an alternative to the 5V USB power adapter*, the ring light
can also be powered via the USB port of a notebook* or PC*.
ADJUSTING THE LIGHT COLOUR
1. Switch on the device.
2. Briefly press the On/Off/Colour set button several times to set the
desired light colour. Sequence of light colours: white, warm, cold,
warm/cold combined

ADJUSTING THE BRIGHTNESS

1. Press the +button to increase the brightness.
2. Press –button to decrease the brightness.
*not included

TECHNICAL DATA

(Fig. 6)
Model
Type
Housing colour
Lighting
Power
Light colours
Power supply
Material
Dimensions
The LEDs have a long lifetime and are not replaceable due to
1
technical reasons.
The power of an LED lighting is higher than that of conventional
2
halogen lights. Therefore, LED's have a lower wattage than
comparable lights.
3 e.g. from smartphone; not included
www.bresser.de/warranty_terms
F004512
LED ring light
white
96 LED's
white, warm, cold or cold/warm
combined
DC 5V/2A
via 5V USB power adapter
ABS plastic/polycarbonate/metal
30x70cm

WARRANTY

F004513
black
1
10W 2
3