Circuit Diagram; Noise Level; Technical Data; Disposal - BOMANN HDR 9013 CB Originalbetriebsanleitung

Cleaning the high-pressure nozzle:
1. Switch off the main switch.
2. Activate the spray gun to release the pressure.
3. Detach the jet pipe.
4. Remove the dirt from the nozzle with the pin.
5. Rinse off the dirt by allowing water to run through the nozzle against
the direction of the jet.

Circuit Diagram

Noise Level

In conformance with DIN EN ISO 3744, the
Workplace-related emission L =
Sound power level L =
are measured

Technical Data

Model: ...................................................................................HDR 9013 CB
Rated voltage/frequency: ......................................................230 V~ 50 Hz
Rated power: ..................................................................................1400 W
Protection class: .........................................................................................II
Minimum feed rate..........................................................................5.5 l/min
Maximum water pressure in inlet: ......................................0.4 MPa (4 bar)
Operating pressure..............................................................7 MPa (70 bar)
Flow rate in operation: ....................................................................5.0 l/min
Maximum allowed pressure ........................................ 10.5 MPa (105 bar)
Maximum flow rate: ........................................................................6.2 l/min
Maximum inlet temperature ...............................................................50 °C
Net weight: ..........................................................................................5.7 kg
The right to make technical and design modifications in the course of
continuous product development remains reserved.
This device has been tested according to all relevant current CE guide-
lines, such as electromagnetic compatibility and low voltage directives,
and has been constructed in accordance with the latest safety regula-
tions.
42
83 +/- 3 dB
99 dB

Disposal

Meaning of the "Wheelie Bin" Symbol
Take care of our environment; do not dispose of electrical appliances via
the household waste.
Dispose of obsolete or defective electrical appliances via municipal
collection points.
Please help to avoid potential environmental and health impacts through
improper waste disposal.
You contribute to recycling and other forms of utilization of old electric
and electronic appliances.
Your municipality provides you with information about collecting points.