Wireless AirCastPro DNP Schnellstartanleitung Seite 5

Configure Your WCM
1. Connect your device's Wi-Fi settings to the WCM
Hot Spot.
SSID: DNPWirelessConnect
Password: dnp12345
NOTE: Both the SSID and the password can be
changed later if you would like to do so.
2. Open your web browser, and type:
dnpwc.local or 192.168.4.1
3. Enter your name and email address to register
your device (first use only).
Add a Printer
1. From the WCM dashboard, select Add from the
printers section. A window will appear that shows
the available printer(s) connected to the WCM.
2. Select your desired printer and then press
Continue.
3. When asked if you want to customize the printer
name, click Yes. DNP recommends renaming
your printer. To name your printer, use the
media size and print finish (example: QW410 4x6
Glossy).
Edit a Printer
Use this section to configure the printer instance to
the specific print size/finish.
1. Select the printer instance you want to edit and
then select Edit.
2. The Printer Option should show the correct print
size automatically. If not, select the Option Value
pull down and select the desired print size. (Print
size should match the size included in the printer
name above.) Select Finish to save the print size.
3. Select the pull down under Printer Option and
select Overcoat Pattern.
4. Select the pull down under Option Value and select the desired
finish–Glossy or Matte.
Printing with the WCM
1. Use any photo app to view your image.
2. Press the Share icon (iOS) or the Menu icon (Android).
3. Scroll through the list and select Print.
4. Press Select Printer Instance set up in the previous step.
5. Press Print.