Configuring The Printserver One - SEH printserver ONE Schnellinstallationsanleitung

 Configuring the printserver ONE
The printserver ONE has a user interface, the Printserver Control Center, which
can be opened in an Internet browser (e.g. Microsoft Edge or Safari).
The printserver ONE can be configured, monitored, and maintained via the
Printserver Control Center.
1. Open your browser.
2. Enter the IP address of the printserver ONE as the URL.
 The Printserver Control Center appears in the browser.
Important:
If the Printserver Control Center is not displayed, check if
a gateway is configured (
settings of your browser.
Detailed information on the administration, configuration and
monitoring of the print server can be found in the print server
user manual.
12
7) and check the proxy

[en] Quick Installation Guide