The Maximum Value Measurement; Data Storage; Data Clearance - Benetech GM1356 Bedienungsanleitung

Press once the key the frequency weighing will turn into C, the LCD
A/C
CLEAR
displays as in figure 10:
Figure10
Note:
A-Weighting for general sound level measurements.
C-Weighting for checking the low-frequency content of sounds.

The maximum value measurement

During measurement process, press the
reading, the LCD displays as in figure 11:
Figure11
Press it again to exit the maximum value measurement and return normal
measurement mode.
-12-
MAX key to lock up the maximum
CLOCK

Data storage

F / S
Press down the key until the LCD screen appears the symbol 1, then
RECORD
press LEVEL or to adjust the record interval, finally press
into the data storage mode, LCD screen displays as in figure 12:
Figure 12
The memory capacity is 4700, after long period of recording, the LCD screen
will appear the symbol FULL, as shown in figure 13:
Figure 13
In data storage process or recording memory is full, press
exit the record mode, the flashing symbol RECORD will disappears.

Data clearance

A/C
Press down the key until the LCD screen displays the symbol CLR, then
CLEAR
all recorded data will be deleted, LCD displays as in figure 14:
Figure 14
to enter
F / S
RECORD
R E C O R D
FULL
F / S key again to
RECORD
-13-