Installation And Connection; Operating; Cleaning - GGG GA-12W Betriebsanleitung

The installation site must meet the following requirements:
o
A dry interior with viable wall and enough space around the
window openings.
o
A suitable distance from humidity, water, heat sources and
objects, such as furniture, textiles and packaging materials.
o
Protection from heat sources and direct sunlight.
o
A non-hazardous environment.
o
A normal room temperature with a normal humidity.
Mount the unit in an adequate height of about 2 m. Choose the darkest
point in the room. Use suitable mounting material depending on the
composition of the wall.
6

Installation and connection

Danger!
Danger from electric shock!
Before installation, make sure that your network matches the input
voltage with the technical specifications of the device. The device may only
be connected if they match. If need consult qualified personnel.
The device is delivered completely assembled and is equipped with a
power cable and plug to connect it to the power supply. Before installing
make sure that the following is correct:
The mains voltage corresponds to the voltage output of the device; to
ensure a proper start-up, an input voltage is required, which deviates not
more than +/- 6 % of the nominal voltage of the device. The mains
supply must be protected by circuit breakers!
7

Operating

Danger!
Danger from electric shock!
The grids have a very high voltage. Do not touch the grids! Never touch
them with metallic or other electroconductive objects.
1.
2.
8

Cleaning

Danger!
Danger from electric current!
Turn the device off and diconnect it from the power supply. Wait at least 5
minutes after decommissioning before you start cleaning.
Connect the device to the power supply.
Press the On/Off-switch.
GGG Gastro-Großküchen-Geräte GmbH
6