Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Part 2. Specifications：
Voltage
Capacity
Total Energy
Standard Discharge Current
Peak Discharge Current(1s)
Standard Charge Current
Recommended Charge
Voltage
BMS low voltage protection
Series/Parallel
Resistance
Cell Type
Part 3. Caution:
1.
Please read the manual before installing and using it.
2.
Battery should not be used in series, if in parallel connection, the battery standard
capacity and remaining capacity should be same.
3.
Do not short-circuit the positive and negative poles of the battery pack.
4.
Please check route circuitry to make sure adapters and connectors are correct.
5.
Do not immerse the pack in water or discard it in fire.
6.
Do not leave the pack near heat or insolate in sunshine.
7.
Keep the battery pack in a cold and dry place. If the storage time is over three
months,please charge it to 100% before using it.
8.
Do not disassemble or reassemble the battery pack.
9.
Please use the dedicated charger to charge the battery pack,max charging current
85A.
10. Please contact customer services when use RS485.
11. Please power off the battery if it is not working. To keep the remaining capacity over
50% and the battery should be charged every 6 months.
12.8V
Discharge Temperature
172Ah
Charge Temperature
2200Wh
Storage Temperature
200A
Terminal Type
600A
Communication
30A-60A
Communication Terminal
14.4V-
（excluding terminals）
14.6V
10.6V
4S2P
Outside Dimensions
≤10mΩ
Gross Weight
LiFePO4
3
Dimensions
Net Weight
Shipping
-20℃-60℃
0℃-55℃
-20℃-60℃
M8
RS232
Not Open
357x301.5x151.5mm
27KG
450x450x255mm
29KG
UN3480 Class9
Werbung
