Herunterladen Diese Seite drucken

Schrempp electronic ML-12-UFE20M Gebrauchsanweisung

Werbung

Gebrauchsanweisung ML-12-UFE20M
Manual/ Notice d'utilisation
ML-12-UFE20M ist eine hochwertige 24V-DC LED-Flächenbeleuchtung für anspruchsvolle industrielle Anwendungen und ist für den
gewerblichen Einsatz konzipiert.
ML-12-UFE20M is a high quality 24V DC LED surface lighting for demanding industrial applications and is designed for commercial
use.
ML-12-UFE20M est un éclairage pour surfaces LED de 24 V DC destiné à des applications industrielles exigeantes et à un usage
professionnel.
Gebrauchen Sie die ML-12-UFE20M nur in technisch einwandfreien Zustand und ohne Veränderungen daran vorzunehmen. Für
anderweitige Nutzung übernehmen wir weder Garantie noch Haftung. Elektrische Installation, Inbetriebnahme- und Wartungsarbeiten
dürfen nur von einer ausgebildeten Fachkraft mit einschlägiger Unfallverhütungs-Ausbildung unter Beachtung der gültigen
Vorschriften durchgeführt werden.
Only use the ML-12-UFE20M in a technically perfect condition and without making any changes. We do not assume any warranty or
liability for any other use. Electrical installation, commissioning and maintenance work may only be carried out by a trained specialist
with relevant accident prevention training in compliance with the applicable regulations.
Utilisez le ML-12-UFE20M uniquement s'il est en parfait état et s'il n'a subi aucune modification. Nous n'accordons aucune garantie et
nous n'assurons aucune responsabilité dans le cas d'une utilisation autre que celle prévue. L'installation électrique et les opérations
de mise en service et d'entretien doivent impérativement être effectuées par du personnel spécialisé formé en matière de prévention
des accidents et respectant les réglementations applicables.
Sicherheitshinweise /
Safety notes/
Die eingesetzten LED's erfüllen die Anforderungen nach der „Low Risk" Gruppe. Diese bezieht sich auf den sichtbaren Bereich und
einer Expositionzeit von 100 Sekunden. Unter realen Umständen für Expositionsdauer und Abstand geht von diesem Produkt keine
Augengefährdung aus. Es muss jedoch hingewiesen werden, dass intensive Lichtquellen durch Ihre Blendwirkung ein
Gefährdungspotential haben. Die Leuchte ist nicht für direkten Kontakt mit Lebensmitteln nach EG 1935/2004 geeignet.
The LED's specified in this data sheet fall into the „low risk" group, relating to devices in the visible spectrum with an exposure time
of 100 seconds. Under real circumstances for exposure time and distance, it is assumed that no endangerment to the eye exists from
this device. It should be mentioned, that intense light scources have a risk potential due to their blending effect. The luminaire is not
suitable for direct contact with foodstuffs according to EG 1935/2004.
Les LED utilisées répondent aux spécifications du groupe „Low Risk". Celui-ci concerne la partie visible et un temps d'exposition de
100 secondes. Dans des conditions réelles de durée d'exposition et de distance, ce produit ne présente pas de danger pour les yeux.
Il faut toutefois signaler que les sources lumineuses intenses peuvent présenter des dangers par éblouissement. La lampe ne convient
pas pour un contact direct avec les aliments conformément aux EG 1935/2004.
Abmessungen /
Dimensions*
Schrempp electronic GmbH – Wiesenstrasse 5 – D-65843 Sulzbach/Ts. - www.schrempp-electronic.de
Tel.: (+49) 06196 / 802399-0 - Fax: (+49) 06196 / 802399-0 - E-Mail: main@schrempp-electronic.de
Consignes de sécurité
Rev.1 / November 2019

Werbung

loading

Inhaltszusammenfassung für Schrempp electronic ML-12-UFE20M

  • Seite 1 ML-12-UFE20M is a high quality 24V DC LED surface lighting for demanding industrial applications and is designed for commercial use. ML-12-UFE20M est un éclairage pour surfaces LED de 24 V DC destiné à des applications industrielles exigeantes et à un usage professionnel.
  • Seite 2 Brown: +24V / Black: EN / Blue: GND Marron: +24V / Noir: EN / Bleu: GND Schrempp electronic GmbH – Wiesenstrasse 5 – D-65843 Sulzbach/Ts. - www.schrempp-electronic.de Tel.: (+49) 06196 / 802399-0 - Fax: (+49) 06196 / 802399-0 - E-Mail: main@schrempp-electronic.de...