Electrical Connection; List Of Parts And Controls - Siemens TN20 Gebrauchsanleitung

Electrical connection

For your safety please read the following
information.
Warning: This appliance must be earthed.
The appliance must be connected to a 220-240
volts 50 cycle AC supply by means of a three pin
socket, suitably earthed and should be protected
by a 13A fuse in the plug.
The appliance is supplied with a rewireable 13A
3 pin plug itted with a 13A fuse. Should the fuse
require replacement, it must be replaced with a
fuse rated at 13A and approved to BS1362. If the
mains plug is unsuitable for the socket outlet in
your home or is removed for any other reason,
then the cut off plug should be disposed of safely
to prevent the hazard of electric shock. There is a
danger of electric shock if the cut off plug is
inserted into any 13A socket outlet.
Unpacking
Keep these operating instruction safe and pass
them on to other users.
• Remove the ironing board from the box.
• Check that the following items are included in
the box:
1. Ironing board.
2. Iron cord support.
3. Iron rest mat.
1
3
Dispose of all plastic bags included in the
packaging, they may become a dangerous toy for
children!.
Note: Retain the rest of the packaging for future
use. (e.g. house moving, servicing, repair etc.).

list of parts and controls

4
3
5
1
9
6
1. Auxiliary power supply socket Max 2760W.
2. Iron cord support.
3. Selector switch.
4. Power indicator light.
5. Power ON-OFF switch.
6. Iron rest mat.
7. Power supply cable.
8. Board height adjustment lever.
9. Iron storage shelf.
2
7
8
2
11
S IEMENS