Herunterladen Inhalt Inhalt Diese Seite drucken

Technics SU-R1 Bedienungsanleitung Seite 24

Netzwerkaudio-vorstufe
Vorschau ausblenden Andere Handbücher für SU-R1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 30
The sound is interrupted.
≥ Depending on your environment, the audio may be
interrupted during playback. Check the operating
instructions of the connected device and the connection to
the device.
Playback does not start.
≥ Depending on your environment or connected devices, it
may take some time.
The system control function is not working.
≥ Connect the cables to the matching LR terminals on this
unit and the SE-R1.
The unit turns off automatically.
≥ Is the auto off function turned on? (
AirPlay/DLNA
Cannot connect to the network.
≥ Confirm the network connection and settings. (
Cannot connect to the unit.
≥ Make sure that the multicast function on the wireless router
is enabled.
≥ Make sure that the device and the unit are connected to
the same network. (
≥ Reconnect the compatible device to the network and then
connect to this unit again.
≥ Set "Network Standby" to "Off" (
on, and then connect to this unit again.
Playback does not start.
The sound is interrupted.
≥ Simultaneous use with other 2.4 GHz devices, such as
microwaves, cordless telephones, etc., may result in
connection interruptions.
Increase the distance between the wireless router and
these devices.
≥ If several wireless devices are simultaneously using the
same wireless network as this unit, try turning off the other
devices or reducing their wireless network usage.
≥ If the playback stops, check the playback status on the
device.
24
(24)
21)
14)
21), turn this unit off and
iPhone/iPad/iPod
Cannot operate.
≥ Select "USB" as the input source.
≥ Check that the iPhone/iPad/iPod is connected properly.
≥ Connect the iPhone/iPad/iPod again or try to restart the
iPhone/iPad/iPod.
≥ The battery of the iPhone/iPad/iPod is depleted. Charge
the iPhone/iPad/iPod, and then operate again.
iPhone/iPad/iPod does not charge.
≥ Make sure the unit is turned on when you start charging.
– When charging an iPhone/iPad/iPod whose battery is depleted,
do not turn this unit to standby mode until the iPhone/iPad/iPod
becomes operational.
USB
The USB drive or its contents cannot be read.
≥ The USB drive format or its contents is/are not compatible
with the unit. (
No response when [1/;] is pressed.
14)
≥ Disconnect the USB device and then reconnect it.
Alternatively, turn the unit off and on again.
Slow operation of the USB flash drive.
≥ Large file size or high memory USB flash drive takes longer
time to read.
PC
The PC does not recognise this unit.
≥ Check your operating environment. (
≥ Restart the PC, turn off and on this unit, and then
reconnect the USB cable.
≥ Use another USB port of the connected PC.
≥ Install the dedicated driver if using a PC with Windows.
Cannot find music files stored on the PC.
≥ When you play back music files over a network, those that
are not registered to its network server are not displayed.
For details, refer to the operating instructions for your
server.
28)
19)

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Su-r1egSu-r1eb

Inhaltsverzeichnis