Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Charging your powerbank (Charging mode)
You should charge your powerbank via USB DC 5.0V adaptor.
(Not supplied)
1. Connect the micro USB connector of the cable to the power input of powerbank.
2. Connect the USB connector of cable to the USB port of Wall/Car adaptor.
3.When the powerbank is in charging mode a blue LED light flashes on the LED power
capacity indicator.
4. The 4 LED indocator will flash one after the others.
5. Once all 4 LEDs are lighted, the charging process is finished.
Remark: The powerbank will switch into low current charging mode when its capacity
reaches 90%, so the 4th LED indicator will flash longer.
5
Werbung
Inhaltsverzeichnis
