Operation - Microlab FС-360 Handbuch

15. Attachments - Do not use attachments not recommended by the product manufactures, as they
may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer's instructions and should use a mounting
accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Unused periods - The power cord of the appliance should be unplugged from the outlet during
lightning storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use.
When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and
rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must
remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
EN
3
Introduction
High Fidelity 2.1 speaker system with the excellent FineCone drivers
Microlab premier range, the FC series is based on the FINE CONE designed by acoustic
expert, Peter Larsen that attains perfect linear frequency response curve. This
characteristics offers distortion free and uncoloured sound. Perfect sound everytime from
your music playbacks and for your perfect entertainment.
Uncolored audio, precise position, and high resolution with Microlab own eAirbass
technology
Features
1. High Fidelity 2.1 subwoofer speaker system with crystal clear acoustics and rich sound
2. 6.5" woofer and 2.5" x 2 V16 full range speakers with perfect linear frequency response curve,
designed by Danish acoustic master, Peter Larsen.
3. Superb dynamics, depth and deep bass - ideal for all audio type of playbacks
4. Slim satellites with tight and clear acoustics
5. Standalone amplifier unit for distortion free and interference free audio, with front controls for easy
access
Packing list
You should find following items while unpacking:
FC360 subwoofer
FC360 satellites
FC360 amplifier
3.5mm stereo - 2RCA cable
User manual
1pc
2pcs
1pc
1pc
1pc
Illustrations
Front View Top view
1
1 / 2
2
VOLUME / SEL
4
3
Front view
1. Power LED: illuminates in green when
power is turn on
2. Master volume knob: adjust volume level
3. Earphone output jack: allows 3.5mm
stereo plug connection for earphones
4. Audio source input jack: allows 3.5mm
stereo plug for connection to media
player source such as computer sound
card, CD / DVD, Mp3 / Mp4 player, etc.
Product connection and operation
Connections
1. Connect the satellites to the left and right RCA interfaces. Connect the subwoofer to the SW input jack.
2. Place both satellites on extreme sides of the listening position and the subwoofer on the floor with its
back close to a wall.
3. Connect the playback device to the rear input RCA interface of the amplifier with the included cable, or
to the front 3.5mm stereo input jack.
4. The amplifier should be placed near a power source and near the playback device such as CD/DVD,
Mp3/Mp4 player or TV.
5. Last, connect the AC power cable at the rear of the amplifier to the AC power supply source. Please
ensure the AC power supply match the power requirement printed at the rear panel.

Operation

1. Ensure the master volume is at the lowest setting.
2. Turn on the main AC power and switch on the speaker system from the top power switch.
3. Start the playback device and song
4. Slowly adjust the volume to your preferred volume level and enjoy.
Note: it is advisable not to turn the volume too loud or to its extreme volume limit to avoid damage to the
speaker driver material. Always adjust in slow increment.
Back view
1
2
Heat vent -
do not block
3
v e n t i l a t i o n
Power
button 4
5
Back view
1. Bass volume knob: allows bass volume
adjustment on the subwoofer.
2. Input 1: 2 x RCA jacks for input source
connection from any media sources such
as CD / DVD, Mp3 / Mp4 player or TV.
3. Output connections: connect to left and
right satellites, and subwoofer.
4. Fuse: fuse socket
5. Power line: AC power source input
EN
4