Notebook Cooling Chill Hub Xc - Targus Chill Hub XC Anleitung

Notebook cooling
Introduction
Congratulations on your purchase of the Targus Notebook Cooling
Chill Hub XC. This cooling device dissipates thermal heat, reducing
your computer's overall temperature, resulting in maximum
performance. It also allows you to connect through a single USB
connection up to 4 USB devices. Its thin yet durable design is both
portable and sturdy.
To use the Chill Hub
1. Remove the USB cable from the bottom of the Chill Hub.
2. Decide on where you want to place the Chill Mat, either on a
work surface, such as a table or desktop, or your lap. If you
choose to use the Chill Mat on a work surface, you can extend
the feet to the required angle.
3. Place the Chill Mat on the work surface or your lap.
4. Position your laptop computer on top of the Chill Hub.
5. Connect one end into the Chill Hub's DC port and the other end
into the power outlet.
6. Connect one end of the USB cable into the mini-B USB port
located at the rear of the Chill Hub.
7. Connect the other end of the USB cable into an available USB
port on your laptop computer.
8. Turn the fan on by sliding the Power switch to "I" for low speed
fan and "II" for high speed fan.
9. To connect a USB device to the Chill Hub, plug the USB cable
from the device into an available port on the Chill Hub.
WARNING: Keep all items, such as loose clothing and jewelry, and long hair away
from the fans to avoid possible personal injury or damage to the Chill Mat or your
computer.

Notebook Cooling Chill Hub XC

Chill Hub XC
4