Ceiling Installation - turbionaire MIO Serie Handbuch

CEILING INSTALLATION

1. Position a suitable location for the fan and cut a flush hole in ceiling to size.
2. Remove the front cover of fan, bring the cable to the unit via a double pole switch with a minimum 3mm separate
on all poles.
3. Pass the main cable through the cable entry and fix the unit into position using suitable fixings (the fixings not
supplied).
4. Ceiling mounted units must be ventilated to the outside and not into the ceiling to avoid or loft space, using a
flexible duct and a back draught shutter to suit.
NOTE: Where ducting (not included) is used, ensure the outlet ducted in such that to avoid the back-flow of gases
into the room from the open flue of gas or other fuel-burning appliances.
NOTE: Ceiling exhaust fan units must be ventilated to the outside and not into the ceilingcavity. Use a duct and back
draught shutter to suit (not included).
12