Specifications - Kenwood K-575BT Handbuch

Specifications

Amplifier
Maximum useful output : 20 W + 20 W (1 kHz,10%
Total harmonic distortion : 0.05 % (1 kHz, 1 W, 8 Ω, 30
Frequency response : 10 Hz to 20 kHz
Tone control characteristics
BASS : ±6 dB (100 Hz)
TREBLE : ±6 dB (10 kHz)
Input terminal
AUDIO IN : Stereo mini 3.5 mm
CD player
Signal readout : Non-contact optical readout
D/A converter : 1 bit
Oversampling : 8 fs (352.8 kHz)
Tuner
FM tuner
Reception frequency : 87.50 MHz - 108.00 MHz
range
Antenna impedance : FM: 75 Ω, unbalanced
USB
Supported USB devices : USB mass storage class
Interface : USB 2.0 (Full speed)
Supported file systems: FAT 16/32
Supply current : max. 500 mA
THD,8Ω)
kHz LPF)
(Semiconductor laser)
devices
USB 1.1 compatible
BLUETOOTH
Version : BLUETOOTH Ver. 3.0 + EDR
Output power : Class 2
Maximum service area: About 10 m
Frequency band : 2.4 GHz range
Compatible : A2DP (Advanced Audio
BLUETOOTH profile
Supporting codec : SBC, AAC, aptX
Speakers
Enclosure : Bass-Reflex type
Speakers : 80 mm cone speaker
Impedance : 8 Ω
Maximum input : 30 W
Power supply/others
Power supply voltage/ : AC 230 V, 50 Hz
frequency
Rated power : 25 W
consumption
Standby power : 0.5 W and below
consumption
Dimensions : Width: 390 mm
Mass (Weight) : 5.4 kg
Specifications and appearance of this unit are subject
0
to change without prior notice for improvement.
You may not be able to obtain satisfactory
0
performance from the System in extreme cold (near
freezing temperatures) condition.
(Communication range may
vary depending on the
environmental conditions.)
Distribution Profile)
AVRCP (Audio/Video
Remote Control Profile)
Height: 119.5 mm
Depth: 267 mm
Depth: 277.5 mm (including
protrusion)
15