Inhaltsverzeichnis
Werbung
Quicklinks
ATP
EC DECLARATION OF CONFORMITY
EC Declaration of Conformity
We
of
in accordance with the following Directive:
hereby state that this declaration of conformity is issued under our sole responsibility as the manufacturer.
Equipment
Model number
is in conformity with the Essential Health and Safety Requirements of the Machinery Directive and the applicable
requirements of the following standards:
EN ISO 11148-6:2012 Hand-held non-electric power tools. Safety requirements. Assembly power tools for
threaded fasteners
EN ISO 12100:2010 Safety of Machinery – General Principles for design – Risk Assessment and risk reduction
The technical documentation for the
machinery is available from:
We hereby certify that the machinery described above conforms with the essential health and safety
requirements of Council Directive 2006/42/EC on the approximation of the laws of the Member States relating to
the safety of machinery.
Name:
Position:
Done at
On
IMPACT WRENCH
Hy-Tech Engineered Solutions
25 LEONBERG ROAD * CRANBERRY TOWNSHIP, PA 16066
USA
2006/42/EC: The Machinery Directive
ATP Magnum Force Impact Wrench
ATP1043
Derya Kisla
Director or European Sales
Universal Air Tool Company
Unit 8 Lane End Industrial Park,
High Wycombe,
Bucks HP14 3 BY
United Kingdom
William Brooks
Engineering Manager
Hy-Tech Engineered Solutions, Cranberry Township, PA
June 3, 2019
ATP
1043
ATP
A DIVISION OF HY-TECH
ENGINEERED SOLUTIONS
25 Leonberg Road
Mashuda Industrial Park
Cranberry Township, PA 16066 USA
(724) 776-6800
FAX (724) 776-0227
Website:
www.hy-techinc.com
E-mail:
info@hy-techinc.com
Werbung
Inhaltsverzeichnis
Verwandte Anleitungen für ATP 1043 Serie
Inhaltszusammenfassung für ATP 1043 Serie
- Seite 1 2006/42/EC: The Machinery Directive hereby state that this declaration of conformity is issued under our sole responsibility as the manufacturer. Equipment ATP Magnum Force Impact Wrench Model number ATP1043 is in conformity with the Essential Health and Safety Requirements of the Machinery Directive and the applicable requirements of the following standards: EN ISO 11148-6:2012 Hand-held non-electric power tools.
-
Seite 2: General Operation
LUBRICATION Use ATP BLUE MAGIC oil. An airline lubricator, set to deliver 1 to 2 drops per minute, is recommended. If a lubricator is not used, add .06 oz. (1.8cc, 18 to 22 drops) of oil into the air inlet once daily. - Seite 3 ATP 1043 ATP 1043 Declaration of Vibration Emission per EN 12096 Values determined according to EN ISO 28927-2 Tool Model Tool Type Operating Measured Uncertainty Number Conditions Vibration Emission Value 1043EI-TH 1" End Grip Inside Pressure at which tool 179.1 m/s 1.5 m/s...
-
Seite 4: Mantenimiento
LUBRICACIÓN Use aceite BLUE MAGIC de ATP. Se recomienda un lubricador para conducto de aire, configurado para administrar 1 a 2 gotas por minuto. Si no usa un lubricador, agregue 0.06 oz. (1.8cc, es decir, 18 a 22 gotas) de aceite en el conducto de aire una vez al día. - Seite 5 SPANISH ATP 1043 ATP 1043 Declaración de generación de vibraciones según EN 12096 Valores determinados según EN ISO 28927-2 Número de Tipo de herramienta Condiciones de Valor medido de Incertidumbre modelo de funcionamiento generación de herramienta vibración 1043EI-TH Gatillo interno de Presión a la que funciona la...
-
Seite 6: Allgemeiner Betrieb
12.89 Hz Tillverkningsår: 2019 SCHMIERUNG Benutzen Sie ATP BLUE MAGIC. Es wird eine Schmiervorrichtung mit 1 bis 2 Tropfen pro Minute empfohlen. Wird keine Driftförhållanden, referens ISO 15744: Ingen Schmiervorrichtung verwendet, fügen Sie 0,06 oz. (1,8cm , 18 bis 22 Tropfen) Öl einmal täglich in den Lufteintritt. - Seite 7 SMÖRJNING Hersteller: Hy-tech Engineered Solutions Eingeführtes Werkzeug: ATP1043EI-TH Använd endast ATP BLUE MAGIC -olja. En luftsmörjare som ger 1 till 2 droppar per minut rekommenderas. Om en smörjare inte Modellnr. ATP1043 Leerlaufdrehzahl: 773.4 U/min används bör 0,06 oz. (1,8 cc eller 18 till 22 droppar) olja läggas till i luftinloppet en gång dagligen.
- Seite 8 Verklaarde dubbel nummer geluidsemissiewaarden LUBRIFICAZIONE Utilizzare l'olio ATP BLU MAGIC. Si raccomanda l'uso di un lubrificatore di linea, impostato per erogare da 1 a 2 gocce al minuto. Se in overeenstemming met ISO 4871 non si utilizza un lubrificatore, aggiungere 0,06 once. (1,8cc, da 18 a 22 gocce) di olio nell'imbocco dell'aria una volta al giorno.
-
Seite 9: Algemene Bediening
Valori di emissione sonora dichiarati a doppio numero Gebruik ATP BLUE MAGIC olie. Een luchtleidingsmeerapparaat, ingesteld om 1 tot 2 druppels per minuut te leveren, wordt aanbevolen. Voeg, wanneer een smeerapparaat niet gebruikt wordt, eenmaal per dag .06 oz. (1,8 cc., 18 tot 22 druppels) olie in de secondo la norma ISO 4871 luchtinlaat. -
Seite 10: Fonctionnement Général
Fabricant : ATP1043EI-TH Hy-tech Engineered Solutions Outil inséré : Utilisez de l'huile ATP « Blue Magic ». Il est recommandé d'utiliser un lubrificateur de conduite d'air, réglé pour délivrer 1 à 2 gouttes Numéro de modèle ATP1043 773.4 r/min Vitesse sans charge : par minute.